网上棋牌游戏

汽车配件电镀

categories of news

Product Categories

contact us

Company Name: Yantai Yuntong Electroplating Co., Ltd.

Contact: Mr. Zhao  

Phone: 0535-4212727  

Mobile phone: 18353530888/18363806777

Address: No. 812, Government Street, Muping District, Yantai

Website: acwlkj.cn

Postcode: 264100


How much does the electroplating industry know?

Your current location : Home >> News >> Company News

How much does the electroplating industry know?

作者: 烟台运通电镀有限公司点击: Release Date: 2019-10-14 Author: Plating Co., Ltd. Yantai Express Views:

The electroplating process is a method of applying a layer of metal to a conductor using the principle of electrolysis. It refers to the use of electroplating in a salt solution containing a pre-plated metal as the cathode, and through electrolysis, the pre-plating metal A surface processing method in which cations are deposited on the surface of the base metal to form a coating.

In the process of plastic electroplating, it is used for many processes, and slight careless operation or inspection may cause product defects. The following are the causes of common defects, I hope to help everyone.

1.Rip

Reason: The surface of the plastic is broken or marked, which causes the residual moisture in the plastic to enter the surface during the electroplating process and form cracks.

2.Flash

Reason: The plastic edge part protrudes due to the excess plastic or uncleanly falling from the mold, which becomes sharp during the molding process, which affects the appearance, and was only noticed after plating.

3.Blisters

Reason: It may be caused by air bubbles generated between the metal deposition layers during the electroplating process, or it may be caused by the moisture contained in the plastic that causes the plastic and metal deposition layers to generate air bubbles. Need to cut open the blister test before identification.

4.Scratches and dents

Reason: Scratches and dents that are not immediately visible during molding or processing, enter their processes, or are caused by scratching the original part during processing. The depth of the scratch or dent can be used to determine whether the defect is shallow or in the substrate.

5, dry up

Cause: Caused when parts become too dry between metal deposits during the plating process. This situation can be avoided by careful process control.

6.Springboard

Reason: The substrate is not completely immersed in the plating solution, or the surface of the substrate is contaminated. Ensure that the substrate is completely immersed and cleaned to reduce the occurrence of springboards.

After reading the explanation above, has it been more helpful? If you want to learn more, you can pay attention to the website.

电镀

URL of this article: http://acwlkj.cn/news/456.html

Keywords: electroplating , Yantai electroplating , electroplating process

Recently Viewed:

    青岛 威海 潍坊 诸城 淄博 烟台 Hot Products | Main Area: Muping Qingdao Weihai Weifang Zhucheng Zibo Yantai

    Yantai Yuntong Electroplating Co., Ltd.

    Contact: Mr. Zhao

    Mobile phone: 183-5353-0888 / 183-6380-6777

    Phone: 0535-4212727 4268278

    Fax: 0535-4216068

    Website: acwlkj.cn

    Address: No. 812, Government Street, Muping District, Yantai

     汽车配件电镀 汽车配件电镀

    Scan and contact us

  • online service
  • contact number
    13905351076

  • Follow us

    汽车零部件维修,锌镍合金,烟台电镀


  • Follow us

    汽车零部件维修,锌镍合金,烟台电镀

  • Leave message
  • Online consultation