网上棋牌游戏

汽车配件电镀

categories of news

Product Categories

contact us

Company Name: Yantai Yuntong Electroplating Co., Ltd.

Contact: Mr. Zhao  

Phone: 0535-4212727  

Mobile phone: 18353530888/18363806777

Address: No. 812, Government Street, Muping District, Yantai

Website: acwlkj.cn

Postcode: 264100


Industry news

Your current location : Home >> News >> Industry News
  • Electroplating equipment manufacturers talk about chemical polishing before plating

    In the electroplating production line of electroplating equipment manufacturers, a series of pre-treatments performed on the workpiece before electroplating are in order to obtain better plating. Then chemical polishing is also important in the entire pre-treatment. Let's take a look at the pre-electroplating treatment. Chemical polishing. Chemical polishing refers to the use of a chemical solution to the workpiece in an appropriate solution without external power supply.
    Release time: 2020-01-04 Clicks: 169

  • Electrophoretic paint drop analysis

    Electrophoretic coatings use water-soluble ionic polymers as the film-forming base material. The coated workpiece can be an anode. After direct current is applied between the two poles for a period of time, a uniform and fine coating that is not dissolved by water is deposited on the surface of the coated object. A special coating method. Under normal circumstances, the paint film is not easy to fall off. The problem of falling paint indicates that the adhesion is not good. About the principle of poor adhesion
    Release time: 2019-12-06 Clicks: 159

  • The parts of the three parts of auto parts repair are very valuable!

    I believe that owners who have driven for several years should know that the parts on the car need to be replaced at a 4S shop or a repair shop after a period of time. This is because cars are also a kind of consumables. If they are used for a long time, the parts on the car surface are also prone to aging or damage, so this is why cars are often
    Release time: 2019-09-21 Clicks: 415

  • What are the commonly used technologies in Yantai electroplating?

    Today I will update you on the related issues of Yantai electroplating. The friends who often pay attention to our website are not new to Yantai electroplating. What I want to tell you today is: What are the common techniques of Yantai electroplating? Right. The cyanide-free alkaline bright copper is pre-plated and thickened on the copper alloy in one step. The thickness of the coating can reach more than 10 μm.
    Release time: 2019-08-16 Clicks: 605

  • Process of Yantai electroplating

    Everyone should have heard of electroplating, but it should not have a great understanding of its process. Then I will give you a detailed explanation of the production process of Yantai electroplating. I believe that everyone has further study and Get it. The complete process of Yantai electroplating 1. Acid leaching → Full plate electroplating copper → Graphic transfer → Acid degreasing → Secondary countercurrent rinsing
    Release time: 2019-07-19 Clicks: 455

  • About the composition principle of zinc-nickel alloy

    About the composition principle of zinc-nickel alloy plating Zinc-nickel alloy plating is a kind of electroplating alloy mainly composed of zinc-nickel two metal materials, and it also contains other metal materials. The alloy plating produced will be different depending on the metal materials contained in the alloy plating. Alloy plating is based on zinc-nickel alloy plating obtained by different plating methods. In order to achieve a certain
    Release time: 2019-07-10 Clicks: 620

  • Performance advantages of ultra-pure water equipment in Yantai electroplating industry

    The ultra-pure water equipment of the Yantai electroplating industry uses a combination of EDI technology and ion exchange technology. The voltage is used to directionally migrate the electric ions in the water, and the electric ions in the water are directed to an anion filtration membrane and a cation filtration by using the ion exchange resin adsorption The membrane finally forms concentrated water and is discharged. Preparation process of typical ultrapure water in Yantai electroplating industry 1.
    Release time: 2019-06-28 Clicks: 457

  • Analysis of the development prospects of domestic electro-galvanized sheet

    The development trend of electrogalvanized sheet is mainly manifested in the following aspects: 1. Development of ultra-deep punched sheet and ultra-wide zinc sheet. At present, foreign ultra-deep drawing galvanized substrates are developing towards high cleanliness, ultra-low carbon, and microalloying. Among them, the zinc plate has a larger width of 2080mm. 2, a large number of strength galvanized sheet. In order to reduce costs in automotive and home appliance materials,
    Release time: 2019-05-25 Clicks: 540

  • The importance of the electroplating industry and the status of China's electroplating industry

    With the continuous development of the times, electroplating has been widely used by everyone, but what is the importance and development status of everyone in its industry? Then I will give you a specific explanation, I hope it can be of great help to everyone. The electroplating industry is one of the basic processes of the manufacturing industry. The industry is an indispensable part of the modern industrial system.
    Release time: 2019-05-13 Clicks: 527

  • Engine compartment problems for auto parts repair

    In fact, the engine compartment is not as complicated as imagined.In particular, the items that need to be checked by the owner himself are just a few basic things, but if we keep an eye on them, we can save a lot of trouble in the maintenance of automotive parts in the future. . Let's take a look at what you need to know about common sense and what you can do by yourself. Motor oil is guaranteed engine
    Release time: 2019-04-11 Clicks: 420

  • Classification of plating process

    The electroplating process is a method of applying a layer of metal to a conductor using the principle of electrolysis. Electroplating refers to a surface processing method in which a salt of a pre-plated metal is used as a cathode, and the cations of the pre-plated metal are deposited on the surface of the base metal by electrolysis to form a coating. . But everyone knows what is his classification? Then take
    Release time: 2019-04-03 Clicks: 569

  • Yantai electroplating: the difference between electroplating and painting

    Both electroplating and painting belong to the category of surface engineering. Through electroplating or painting, metal or some non-metallic surfaces can have special functions. Do you know the difference between electroplating and painting? Then Yantai Electroplating will introduce to you what is the difference between electroplating and painting. I hope it will be of some help to everyone. Electroplating is a form of electrolysis, an ionization
    Release time: 2019-03-21 Clicks: 628

A total of 36 12 Articles per page Pages: 1/3
2 3 下一页 尾页 1 2 3NextLast
青岛 威海 潍坊 诸城 淄博 烟台 Hot Products | Main Area: Muping Qingdao Weihai Weifang Zhucheng Zibo Yantai

Yantai Yuntong Electroplating Co., Ltd.

Contact: Mr. Zhao

Mobile: 183-5353-0888 / 183-6380-6777

Phone: 0535-4212727 4268278

Fax: 0535-4216068

Website: acwlkj.cn

Address: No. 812, Government Street, Muping District, Yantai

 汽车配件电镀 汽车配件电镀

Scan and contact us

  • online service
  • contact number
    13905351076

  • Follow us

    汽车零部件维修,锌镍合金,烟台电镀


  • Follow us

    汽车零部件维修,锌镍合金,烟台电镀

  • Leave message
  • Online consultation
  • Tencent QQ